Stryker 3000 - Recommended Parts Kits

Chapter One – Introduction
13
1.4 RECOMMENDED PARTS KITS
MPS 3000 STARTER PACKAGE
 Sensor Coil Cord Kit p/n 3000–200–741
 Power Coil Cord Kit p/n 3000–200–743
 Power Cord Kit p/n 3000–300–737
 Lift Motor Kit p/n 3000–200–727
 Fowler Motor Kit (includes clutch) p/n 3000–300–703
 Gatch Motor Kit p/n 3000–300–711
 Load Cell Kit (optional equipment) p/n 3000–307–701
 Weigh CPU (optional equipment) p/n 3000–307–959
 Caster Assembly p/n 3000–200–30 and 3000–200–16 (steer)
 Main CPU Board Assembly p/n 3000–300–941
 Junction Power Board Assembly p/n 3000–300–961
 Interface Board Assembly p/n 3000–303–933
 Lift Potentiometer Kit (Head) p/n 3000–200–929
 Lift Potentiometer Kit (Foot) p/n 3000–200–731
 Single Tube of Grease p/n 3000–200–700
 Hardware Kit (reference p/n below)
MPS 3000 HARDWARE KIT – P/N 3000–000–700
 Fuses (Variety)
 Cover Fasteners (Variety) – siderails, bellows, lift covers, litter access, inner
shield
 Snap Rings (Variety)
 Sheet Metal Screws (Variety)
 Cable Clamps (Variety)
 Roll Pins (Variety)
 Cotter Pins (Variety)
 Steer Cable Retainer with Set Screw
 Brake Pedal Bolt
 Siderail Module Screws
 Push Retaining Ring
 Micro Switch (motion interrupt, brake)