To Next PageTo Next Page
Need help?Do you have a question about the Stryker 2141 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Manufacturer | Stryker |
| Model | 2141 |
| Weight Capacity | 500 lbs |
| Adjustable Height | Yes |
| Side Rails | Yes |
| Wheels | Yes |
| Mattress Type | Foam |
Defines the purpose of the Stryker InTouch™ Critical Care Bed.
Provides a brief overview of the bed's intended use.
Shows a diagram labeling key components of the bed.
Details physical and functional specifications like weight, dimensions, and load capacity.
Lists specific sizes for patient surface, seat, foot, Fowler, and gatch sections.
Outlines specifications for bed lift speed, scale accuracy, CPR, and drive systems.
Covers mattress size, power, environmental conditions, and safety alert term definitions.
Explains various symbols representing warnings, electrical safety, and compliance.
Provides essential safety instructions for operating the bed.
Focuses on safe practices related to patient positioning and siderail usage.
Instructions for using CPR pedal, manual backup brake, and ZOOM® drive safety.
Steps for installing boards, connecting power, setting time/date, and testing controls.
Procedures to verify CPR release and optional features like ZOOM® Drive.
Explains bed power states, battery charging, and operational modes.
Details how to use the bed's electronic and manual brake/drive systems.
Covers CPR release, Foley bag hooks, and patient restraint locations.
Describes night light, nurse call system, and auxiliary power outlet usage.
Instructions on how to lower and raise the bed's siderails safely.
Details the available bed positions and the use of the optional bed extender.
Illustrates and describes the functions of the nurse control panel for bed movement.
Explains how to achieve Flat, Chair, Trendelenburg, and Reverse Trendelenburg positions.
Details the functions and indicators of the brake and motion control panel.
Describes the buttons and operations available on the patient pendant.
Identifies and explains the buttons on the footboard control panel and indicators.
Explains indicator lights and touch screen interaction.
Details accessing and configuring patient data like ID, height, and Braden Scale.
Covers adding new patients and customizing the information screen.
Explains bed height, section adjustments, and indicator functions.
Introduces the scale interface, current weight, and key functions.
Describes using delayed weight and switching between lbs/kg.
Explains the zeroing process and notes on weight data.
Details how to view and navigate through past weight records.
Instructions for updating equipment and handling data.
Step-by-step guide for manually adjusting patient weight.
How to monitor weight changes and reset scale data.
Configuring detection zones, arming, and disarming the bed exit system.
Adjusting alarm volume and selecting tones for bed exit alerts.
Covers air mattress detection and XPRT mattress integration.
Details PositionPRO™ features and siderail interaction.
Lists available options like Time Setup, Smart TV, and Language.
Instructions for configuring time, date, TV, and language.
Covers activation of ZOOM® Voice, Awareness, and Reminder functions.
How to view Scale, Head of Bed, and Angle history.
Details viewing and resetting bed height history logs.
Accessing maintenance codes and adjusting screen backlight.
Instructions for enabling/disabling bed control lockouts.
Monitoring bed status and managing alarms via the Event Manager.
How to add and manage one-time or repeated protocol reminders.
Details how reminders are presented and managed when active.
Viewing historical data for Head of Bed angle and bed height.
Explains the use of built-in calculation and unit conversion utilities.
Accessing medical translations and audio playback.
Retrieving and viewing logged patient information by date.
Performing and interpreting the Braden Scale assessment.
Selecting, playing, and managing sound therapies and playlists.
Guide on operating the bed's motorized drive system, including handles and safety.
Step-by-step instructions for attaching the bed extender accessory.
Procedure for attaching the single-stage I.V. pole to the bed.
Procedure for attaching the dual-stage I.V. pole to the bed.
Instructions for attaching the line management system clip.
Steps to mount the monitor tray onto the foot end of the bed.
Procedure for attaching the upright oxygen bottle holder.
Instructions for mounting the oxygen bottle holder on the headboard.
Steps for connecting various pendant accessories with motion control and nurse call.
Guide for installing traction sleeves on the bed corners.
Instructions for connecting the wall saver to the bed and hospital connector.
Steps for mounting the holder onto the fowler frame.
Guidelines for safely cleaning the bed surfaces and mattress.
A comprehensive checklist for annual preventative maintenance of the bed.
Details the warranty period and conditions for the critical care bed.
Information on how to contact Stryker for parts and technical assistance.
Overview of service contract benefits and programs.
Outlines different service agreement levels and their inclusions.
