English
www.stryker.com 2131-009-005 REV A 1-37
Return To Table of Contents
MAIN MENU: BED EXIT
Button Name Function
Zone
Activation
A Traditional Bed Exit Zone
Press this button to activate the complete zone of detection.
This is the default zone.
B Medium Zone Press this button to activate the medium zone of detection.
C Small Zone Press this button to activate the small zone of detection.
Arm/
Disarm
D Arm Press this button to Arm the Bed Exit Detection System.
E Disarm Press this button to Disarm the Bed Exit Detection System.
F Volume (see page 38) Press this button to access the Volume menu for the alarm.
Note
• A minimum of 5 lbs is necessary to arm the Bed Exit System.
• During a power outage, the parameters that were set for the detection of the Bed Exit are maintained and saved.
When power resumes, the system will reactivate itself to the same state it was before the power outage. The zone
that was selected before the power outage and the signal CALL NURSE on the wall of the hospital (optional) are
activated.
• The blue color on one of the zones indicates that this is the zone which is actually activated.
• When the zone color turns red, it means that there is a Bed Exit Alarm. In that case the Event Manager window
will appear.
Footboard Operation Guide
Bed Exit
Arm
Disarm
D
A B
C
E
F
To Next Page
Loading...
Need help?
General
