Stryker 2141 User Manual

English
www.stryker.com 2131-009-005 REV A 1-79
Return To Table of Contents
Preventative Maintenance
Beds require an effective maintenance program, we recommend checking these items annually. Use this sheet for
your records. Keep on file.
CHECKLIST
_____ All fasteners secure (reference all assembly prints).
_____ Engage brake pedal and push on the bed to ensure all casters lock securely.
_____ “Brake Not Set” LED on the footboard and head end siderails when brakes are not engaged.
_____ Locking steer caster engages and disengages properly (2131 Model only).
_____ Siderails move, latch and stow properly.
_____ CPR release working properly.
_____ I.V. pole working properly (if on bed).
_____ No cracks or splits in head or footboards.
_____ No rips or cracks in mattress cover.
_____ All functions on head end siderails working properly (including LED’s).
_____ All functions on footboard working properly (including LED’s).
_____ Scale and bed exit system working properly.
_____ Night light working properly.
_____ Power cord not frayed.
_____ No cables worn or pinched.
_____ All electrical connections tight.
_____ All grounds secure to the frame.
_____ Ground impedance not more than 100 milliohms.
_____ Current leakage not more than 300 microamps.
_____ Engage drive wheel and ensure it is operating properly (ZOOM® option - 2141 model only).
_____ Motion release switches working properly (ZOOM® option - 2141 model only).
_____ Confirm head end ZOOM® handle functionality (2141 model only).
_____ Confirm battery powered functionality.
_____ Ensure ground chains are clean, intact, and have at least two links touching the floor.
_____ Check fowler angle for accuracy 0
0
- 70
0
.
_____ Check gatch angle for accuracy 0
0
- 15
0
.
_____ Check foot section angle for accuracy 0
0
- 50
0
.
_____ Siderail switches working properly (iBED Awareness option).
_____ iBED Awareness Light Bar LED’s on footboard and siderails working properly (iBED Awareness option).
_____ Inspect footboard control labeling for signs of degradation.
_____ Ensure calibration of the touch screen is accurate.
_____ Ensure calibration of the bed is accurate.
Bed Serial Number: ________________________ ________________________
________________________ ________________________
________________________ ________________________
________________________ ________________________
Completed by: ___________________________________________ Date: _________________

Stryker 2141 Specifications

General

Brand	Stryker
Model	2141
Category	Medical Equipment
Language	English