To Next Page
R
Roy JohnsonJul 26, 2025
What to do if Stryker L9000 LED Lighting Equipment has no light output?
- AAmber WilliamsJul 26, 2025
If your Stryker Lighting Equipment isn't producing light, make sure the AC power cord is properly connected to both the hospital-grade power outlet and the rear console panel inlet. Also, verify that the power switch on the front panel is turned on (it should be illuminated). Check all fuses to ensure they are working correctly. Ensure the light cable is correctly engaged with the cable port. As a safety measure, the L9000 won't emit light unless a fiberoptic light cable is properly connected to the port. Check for error codes E-1, E-2, E-3, E-4, or E-5. Make sure the vents are not obstructed. If the safety shutoff has been activated, the L9000 should be returned for service.
General
