Stryker LIFEPAK 15 User Manual

Page 15
LIFEPAK 15 Monitor/Defibrillator
Auxiliary power management
1. Connect power cord to power adapter and auxiliary
power source
2. Conrm LED strip on power adapter is illuminated
3. Connect power adapter output cable to power adapter
4. Connect green end of output cable to auxiliary power
connector on back of debrillator
5. Conrm (power connected) and (battery
charging) LEDs are illuminated
Note: At least one battery should be installed at all times.
Keep monitor/debrillator connected to auxiliary power
whenever possible to maintain battery charge level.

Stryker LIFEPAK 15 Specifications

General

Battery	Lithium-ion
Defibrillator	Yes, biphasic
Defibrillation Energy Range	1-360 J
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
EtCO2 Monitoring	Yes
Invasive Pressure Monitoring	Yes
Temperature Monitoring	Yes
Connectivity	Bluetooth, WiFi
ECG Monitoring	12-lead