Stryker LIFEPAK 15 User Manual

Page 14
LIFEPAK 15 Monitor/Defibrillator
1. Press ON
2. Connect adapter cable to TEMP port on monitor
3. Connect temperature probe to adapter cable
4. Attach temperature probe to patient according to
probe Instructions for Use
5. Conrm temperature reading appears and is stable
Note: The temperature probe may require three minutes
to equilibrate after patient placement.
Monitoring continuous temperature

Stryker LIFEPAK 15 Specifications

General

Battery	Lithium-ion
Defibrillator	Yes, biphasic
Defibrillation Energy Range	1-360 J
SpO2 Monitoring	Yes
NIBP Monitoring	Yes
EtCO2 Monitoring	Yes
Invasive Pressure Monitoring	Yes
Temperature Monitoring	Yes
Connectivity	Bluetooth, WiFi
ECG Monitoring	12-lead