Stryker Performance-PRO XT - Page 44

A
B
C
D
E
F
A
B
E
D
C
F
FFiigguurree 3333 –– IIVV ppoollee rraaiisseedd ppoossiittiioonn
AAttttaacchhiinngg aann ooxxyyggeenn bboottttllee ttoo tthhee ooxxyyggeenn bboottttllee hhoollddeerr
CCAAUUTTIIOONN
• Do not load the oxygen bottle holder above the safe working load of 15 lb (6.8 kg).
• Do not use two oxygen bottle holders at the same time.
To attach an oxygen bottle to the oxygen bottle holder:
1. Place an oxygen bottle in the holder.
2. Insert the lower strap through the buckle and affix the strap onto itself to secure the oxygen bottle to the holder.
NNoottee
• Do not use the oxygen bottle holder to hold an oxygen bottle holder when the transport vehicle is in motion. Always place
the oxygen bottle holder in an appropriate storage location when the transport vehicle is in motion.
• Inspect the straps and clips for wear between use. Replace the strap if it no longer holds the oxygen bottle.
EN 40 6086-209-001 Rev F.2