Stryker S3 Quick Start Guide

Zone 1 (default)
Allows the patient to move
freely on the bed, but alarms
when patient moves 50 per-
cent of body weight out of
the designated zone.
Zone 2
Allows limited movement.
Alarms when the patient
approaches the siderail or
foot end of the bed.
Zone 3
Allows very minimal move-
ment. Alarms when patient
moves out of the tightly
restricted zone.
Chaperone Bed Exit System: Zones

Stryker S3 Specifications

General

Weight Capacity	500 lbs (227 kg)
Maximum Patient Weight	500 lbs (227 kg)
Bed Frame Material	Steel
Type	Hospital Bed
Bed Width	35 inches (89 cm)
Caster Size	5 inches (12.7 cm)
Electrical Requirements	120 VAC, 60 Hz
Width	35 inches (89 cm)
Power Requirements	120 VAC, 60 Hz
Power Backup	Battery backup available
Accessories	IV pole
Siderails	Yes