To Next Page
B
brenda40Aug 1, 2025
What to do if there is no video on my Stryker Receiver?
- AAntonio BeasleyAug 2, 2025
If there is no video on your Stryker Receiver and the power LED is off, ensure the power cord is properly connected to the device. If the power LED is on, verify that the HDMI video cables are correctly connected to both the Transmitter and Receiver. If the token LED is pulsing white, insert the token to link the Transmitter and Receiver. If the token LED is blinking amber R D, ensure the device is well-ventilated and the air vents are not blocked. If the conditions are not sufficient for optimal wireless performance, re-orient or relocate the unit, increase separation distance between units and other wireless capable devices. Cycle the power switch and re-link.
General