English
EN
www.stryker.com 101515 REV E 1-7
Introduction
Product keypad
A Indicator / Warning light
Red warning LED flashes with a short audible beep to
inform the operator that the product has reached the
desired temperature or is moving to the next cycle
B Water flow Check hoses or clamps for kinks or occlusions
C
Water level
Check water level
D
Setpoints Toggle through the four setpoints, temperature in C
and F
E
On/Standby button Green indicates the unit is on / Yellow indicates power
is supplied to the unit but the unit is not on
F Therapy cycles
Continuous cycle, 30 minute cycle, or 20 minute cycle
G Setpoint lock Prevents tampering of settings
Contact information
Contact Stryker Customer Service or Technical Support at: 1-800-327-0770.
Stryker Medical
3800 E. Centre Avenue
Portage, MI 49002
USA
To view your operations or maintenance manual online, see https://techweb.stryker.com/.
Have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical
Support. Include the serial number in all written communication.
To Next Page
Loading...
Need help?
General
