Riverside - Multistage Drive
®
pg 13
Power Up Modes – Bypass Mode Selection
Press and hold the ON
footswitch while powering
up the pedal. Once both
LEDs flash, release the
footswitch.
Press the ON or FAVORITE footswitch to store
The Bypass mode and begin using Riverside.
1
3
Turn the LEVEL knob to select
True Bypass or Buffered
Bypass
2
GREEN - True Bypass
(default)
RED - Buffered Bypass:
Using Buffered Bypass allows
Volume mode and Boost
Switch mode.
Setting Riverside to Buffered Bypass mode preserves the high
frequency response of your guitar signal through your pedal chain
and long cable runs.
To Next Page
Loading...
