Strymon Riverside - Live Edit Functions; Live Edit Function Adjustments

Riverside - Multistage Drive
®
pg 37
NOISE GATE THRESHOLD
(Separate for Preset/Man)
(See page 9 for an illustrated
description)
MIDI EXPRESSION ON/OFF
(Off= ignore CC100)
(See page 30 for an illustrated
description)
BOOST LEVEL
(See page 11 for an illustrated
description)
Turn DRIVE knob - status shown
on FAVORITE LED
Off = Green (default)
Engaged = Amber
Extreme = Red
Turn TREBLE knob - BOTH LEDs
show status momentarily
Off = Red (default)
On = Blue
Turn LEVEL knob - Status shown
on ON LED
Sweeps from 0dB (Green) to
+6dB (Red)
Below is a list that details how to access all secondary
parameters that are adjustable from Riverside’s interface that
do not have dedicated knobs or switches. All secondary control
parameters are saved per-preset.
Live Edit Functions
Press and Hold the ON footswitch until both LEDs start blinking to
enter Live Edit mode. Release and use knobs as described below.
Press ON again to store your changes and exit Live Edit mode.