Strymon Riverside - Specifications; Power Adapter Requirements

Riverside - Multistage Drive
®
pg 25
Input Impedance 500k Ohm
Output Impedance 100 Ohm
A/D & D/A 24-bit 96kHz
Max Input Level +8dBu
Frequency Response 20Hz to 20kHz
DSP performance 1585 MegaFLOPS
Bypass Switching True Bypass
(electromechanical relay switching)
Dimensions 4.5” deep x 4” wide x 1.75” tall
(11.4 cm deep x 10.2 cm wide x 4.4 cm tall)
Use an adapter with the following rating: 9VDC center negative;
250mA minimum.
Specifications
Power Adapter Requirements
Features (cont.)
• Premium analog front end and output section
• Super high performance SHARC DSP in a compact form factor
• 32-bit floating point processing
• True Bypass (electromechanical relay switching)
• Designed and built in the USA