Strymon Riverside - Page 24

Riverside - Multistage Drive
®
pg 24
Features
• Custom cascading multistage distortion topology provides a wide
range of tube-inspired drive tones
• Digitally controlled analog class A JFET input gain stage maximizes
headroom while adding up to 20dB of pure analog gain
• Precision crafted DSP gain stages provide detailed complexity and
responsiveness
• Low gain channel for smooth classic overdrive
• High gain channel for modern saturated distortion
• 3-band EQ with independent Bass, Middle and Treble controls
• Selectable post-analog gain mid-band EQ push
• Presence switch to tailor the sound for use with all amplifiers from
dark to bright
• Optional variable-threshold noise reduction helps tame noisy guitar
pickups
• High impedance mono input
• Mono output
• Favorite footswitch to save and recall a favorite setting
• Expression pedal input allows the connection an expression pedal
for simultaneous morphing control over multiple parameters
(Expression mode), or logarithmic taper for smooth volume control
(Volume mode)
• Boost pedal input allows connection of an external footswitch for
up to +6dB of analog boost, or to toggle the Favorite preset on other
Strymon pedals (Favorite Out mode)
• MIDI accessible via EXP Jack for remote parameter control and
access to 300 preset locations
• Ultra low noise, high performance 24-bit 96kHz A/D and D/A
converters provide uncompromising audio quality