Strymon sunset - Front Panel Controls; A Effect Circuit Types; B Effect Circuit Types

TOP PANEL FUNCTIONS
A and B channel switches
Selects one of three circuit
options for each channel.
Ge: germanium diode circuit
with dry parallel path.
texas: single stage soft-clipper
with a mid bump.
treble: clean boost, tone knob
removes low frequencies.
2stage: soft-clipping stage
followed by hard-clipping stage.
hard: high gain single stage
hard-clipping circuit.
JFET: clean boost that subtly
beefs up and warms your signal.
LEVEL
Controls the output volume for
each channel when engaged.
DRIVE
Adjusts the amount of gain
applied to each channel.
TONE
Adjusts the treble frequencies for
each channel. The character and
response of the control varies with
the circuit type.
A and B footswitches
Toggles the channel on and o, indicated by a red LED when engaged. When
both channels are bypassed, an electromechanical relay is activated for true
bypass. See user manual for details on changing this to buered bypass.