Strymon sunset - Level, Tone, and Drive Knobs; Footswitch Operations

REAR PANEL SWITCHES & CONNECTIONS
IN
Mono instrument input.
BRIGHT
Tailors the top end character of the output to match
your amp.
Config Switch
Selects the eect order for the 2
sides of Sunset. Selecting A+B will
place the eects in a parallel signal
chain.
FAV
Connect an external switch to remotely toggle
between the current settings and a saved
Favorite setting.
OUT
Mono signal out.
EXP
Use a standard TRS expression
pedal to control the output volume
of the eect (default configuration).
The EXP input can also be used to
remotely control any combination of
knobs with an Expression Pedal. See
user manual for details.
POWER
Use an adapter with the following
rating: 9VDC center negative.
250mA minimum.
Download the full Sunset manual at strymon.net/support/sunset