Strymon TimeLine Firmware Update Procedure

Firmware Update Procedure
®
®
USER MANUAL
pg 1
ON A MAC: Download and install Sysex Librarian http://www.snoize.com/SysExLibrarian/
(Sysex Librarian is Free & Open Source software)
Firmware updates for TimeLine are supported via MIDI SYSEX.
WHAT YOU WILL NEED TO UPDATE YOUR TIMELINE: A Mac or PC with a MIDI interface. A program capable of sending MIDI sysex data.
(Sysex Librarian on the Mac and SendSX on the PC)
OUT
1. CONNECT MIDI AND POWER TO TIMELINE
2. UPDATE TIMELINE
Connect the output of
your MIDI interface to
MIDI IN on TimeLine. The
M-Audio USB UNO 1x1 is
inexpensive and has been
tested to work.
>> Make sure to install the latest drivers for your MIDI interface before attempting to update TimeLine! <<
Set the preference for “Pause between
played messages” to 0.
Drag the update files into the SysEx Librarian main window and
select your MIDI interface in the pull down menu.

Strymon TimeLine Specifications

General

Effect Type	Delay
Presets	200
Technology	Digital
Expression Pedal Input	Yes
Looper	Yes
Inputs	2 x 1/4"
Outputs	2 x 1/4"
MIDI	In/Out
Power Source	9V DC
Delay Types	12 delay machines including Digital, Dual, Pattern, Reverse, Ice, Duck, Swell, Trem, Filter, Lo-Fi, dTape, dBucket