Studer Innotec SA
Quick guide RCC-02/-03
Quick guide V 6.1.0 15
Xtender parameter description
Contact deactivated over SOC (AUX 2)
Delay to deactivate (AUX 2)
Deactivate if battery in floating phase (AUX 2)
Security, maximum time of contact (AUX 2)
Maximum time of operation of contact (AUX 2)
Reset all settings (AUX 2)
AUXILIARY CONTACTS 1 AND 2 EXTENDED FUNCTIONS
Number of starting attempts
Starter pulse duration (with AUX2)
Time before a starter pulse
Main contact hold/interrupt time
Remote entry (Remote ON/OFF)
Prohibits transfert relay
Using a secondary value for the maximum current of the
AC source
Second maximum current of the AC source (Input limit)
Decrease of the max. current of the source with input
voltage activated by remote entry
Prohibits battery priority
Prohibits charger using only power from AC-Out
Batteries priority as energy source (Not in parallel)
After battery undervoltage
Number of batteries undervoltage allowed before
definitive stop
Time period for batteries undervoltages counting
Number of batteries critical undervoltage allowed
before definitive stop
Time period for critical batteries undervoltages counting
After battery overvoltage
After inverter or Smart-Boost overload
Delay to restart after an overload
Autostart to the battery connection
System earthing (Earth - Neutral)
To Next Page
Loading...
Need help?
General
