Studer Innotec SA
Quick guide RCC-02/-03
Quick guide V 6.1.0 29
Xcom-CAN information description
High resolution State of Charge
Recommended charge current
Recommended discharge current
7.4 USER INFORMATION ON VARIOTRACK DISPLAYS
VarioTrack information description
Voltage of the PV generator*
Power of the PV generator
Production in (Ah) for the current day
Production in (kWh) for the current day
Produced energy resettable counter
Production in (Ah) for the previous day
Production in (Wh) for the previous day
Model of VarioTrack (VT-80, VT-65)
Operating mode (Night, StartUp, ---, Charger, ---, Security, OFF, -
--, Charge, Charge V, Charge I, Charge T, Ch. Ibsp)
Max PV voltage for the current day*
Max battery current of the current day
Max power production for the current day
Max battery voltage for the current day
Min battery voltage for the current day
Number of irradiation hours for the current day
Number of irradiation hours for the previous day
Type of error (No Error, BatOverV, Earth, No Batt, OverTemp,
BatOverV, PvOverV, Others, ---, ---, ---, ---, HardErr)
Number of days before next equalization
Battery cycle phase (Bulk, Absorpt., Equalize, Floating, ---, ---,
R.float., Per.abs., ---, ---, ---, ---)
Synchronisation state (---, ---, ---, ---, XTslave, VTslave, ---, ---,
VTmaster, Autonom., VSslave, VSmaster)
State of the VarioTrack (Off, On)
Local daily communication error counter (CAN)
Remote entry state (RM EN 0, RM EN 1)
*This information is not visible on the shared display (Multi) over all VT devices. It will however show on the
individual display on each device.
To Next Page
Loading...
Need help?
General
