EasyManua.ls Logo

Stuv 21 - Installation; On Taking Delivery of the Equipment; Unpacking

Stuv 21
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
SN 132150 - ...
1 2
3
1 2
Stûv 21 - installation [en] - 04-2013
On taking delivery of the equipment
Remove the cardboard from the front
of the stove [photos 1 & 2].
Please note !
Upon receipt of this stove, please
ensure than the glass door has not
been damaged during delivery. The
guarantee only covers damage due
to transport if it is reported within
48hours of delivery and it is indicated
on the delivery slip.
Complaints
In case of complaints please state our
manufacturer’s serial number which
is visible on the upper right section of
the opening [photo 3].
INSTALLATION
Unpacking
Please note !
The paint is not oven baked and is
therefore relatively fragile but will
harden after being heated a few
times. Handle the system with care
when installing.
For transport, the window is secured
in its intermediate position.
Remove protective strip from window
[photo1].
Remove vertical front slats with claw
[photo2].

Other manuals for Stuv 21

Related product manuals