Positioning of the stove (continuation)
To calculate the re-cut :
Opening of fireplace before re-cut
minus required fireplace opening
height. If you wish to have the
fireplace opening at a height of
45cm : 60cm – 45cm =15cm
re-cut.
Right the fireplace, position it in its
final location and set it level with the
5mm Allen key [photo7].
Locating the external air intake option
Locating the box :
Screw the box to the stove using two
M5x8 torx screws.
Warning!
The box cannot bear the weight of
the stove. Take care not to damage
the box or the stove when standing
the device up.
To Next Page
Loading...
