When the installation of the stove is complete…
... Carry out a test to ensure it is
working correctly.
Before this test, ensure no items
involved in installation have been left
in the combustion chamber or in the
bends (spray paint, tubes of grease,
tools).
When the fire is first lit, some smoke
or odours may be produced : Ventilate
the room thoroughly.
See directions for use.
Once installation is complete, return
the directions for use to the user. Fill
in the guarantee certificate with him
(at the back of the directions for use)
and advise him to return it to the
manufacturer or importer.
Checking the damper
Check that the damper is working
properly. To do this, make a visual
check that both parts of the damper
fit together properly [diagram 2]
Adjust the secondary air intake to
half-open.
To Next Page
Loading...
