Stuv 21 - Presentation of the Product; Standards, Certification and Technical Characteristics

3
SN 132150 - ...
Stûv 21 - installation [en] - 04-2013
Standards, certification and technical characteristics
The Stûv 21 stoves (for intermittent
operation) comply with the
requirements of EN European
Standards in terms of efficiency,
gas emissions, safety etc….
Data provided in this notice are
supplied by a certified laboratory.
Test results according to
EN13229 : 2001 and
13229–A2 :2004 standards
(built-in stoves)
PRESENTATION OF THE PRODUCT
Concept & Forme sa
B-5170 Bois-de-Villers (Belgium)
10 QA 101322907
EN 13229 : 2001 / A2 : 2004
Wood insert Stûv 65H SF
Minimum insulation thickness with
regard to potentially combustible
materials (conductibility of the
insulating material used
at 400°C = 0.11 W/mK) :
– behind : 12cm
– on the sides : 12cm
– below : 0cm
– above : 8cm
Recommended fuel : wood logs only
CO emissions : 0.06%
Average smoke temperature
at rated power : 329°C
Nominal heat power : 12kW
Efficiency : 78%
Particle emissions : 13mg/Nm
3
Please read the installation
instructions and directions for use !
Concept & Forme sa
B-5170 Bois-de-Villers (Belgium)
10 QA 101322908
EN 13229 : 2001 / A2 : 2004
Wood insert Stûv 21/75 SF
Minimum insulation thickness with
regard to potentially combustible
materials (conductibility of the
insulating material used
at 400°C = 0.11 W/mK) :
– behind : 13cm
– on the sides : 13cm
– below : 0cm
– above : 9cm
Recommended fuel : wood logs only
CO emissions : 0,07%
Average smoke temperature
at rated power : 283°C
Nominal heat power : 10kW
Efficiency : 80%
Particle emissions : 26 mg/Nm
3
Please read the installation
instructions and directions for use !
Concept & Forme sa
B-5170 Bois-de-Villers (Belgium)
14 QA 141322914
EN 13229 : 2001 / A2 : 2004
Wood insert Stûv 65C SF
Minimum insulation thickness with
regard to potentially combustible
materials (conductibility of the
insulating material used
at 400°C = 0.11 W/mK) :
– behind : 17cm
– on the sides : 12cm
– below : 2cm
– above : 17cm
Recommended fuel : wood logs only
CO emissions : 0.08%
Average smoke temperature
at rated power : 298°C
Nominal heat power : 7kW
Efficiency : 76%
Particle emissions : 65 mg/Nm
3
Please read the installation
instructions and directions for use !