11
SN 138804 - ...
1
2
4
3 4
Stûv 30 - directions for use [en] - 07/13
Basic usage
Unlocking and opening the doors
Use the cold grip as a key to open and
close the doors. Always lock the doors
before rotating the drum
[photos 1 and 2].
Opening the ash-pan door
Place your hand under the lower right
edge of the door and pull it towards
you [photos 3 and 4].
Initial cautions
Before lighting the first fire in your
new stove, ensure no items used in
installation (spray paint, tools) have
been left in the combustion chamber
or in the bends.
The paint is not oven-baked ; it is
thus relatively fragile but will harden
when heated for the first few times.
Consequently, take care when
handling the appliance.
When lighting the fire for the first
few times, some smoke or unpleasant
odours may be released from the
paint, the steel’s protective oil or the
drying of the bricks. We recommend
that you keep your first fire burning
strongly for several hours with the
windows open. The paint will harden
and the odours will disappear.
The paint of some components inside
the combustion chamber will be
replaced by a layer of carbon.
To Next Page
Loading...
