Sub-Zero Designer Series Installation Guide

subzero.com | 5
Opening Dimensions
DUAL INSTALLATION
If two units are installed side by side, a dual installation kit
may be required. Installations without a custom filler strip
require a dual installation kit. If a dual installation kit is not
specified, a 2"
(51) filler strip is recommended between the
units. Dual installations without a filler strip can only be
accomplished using two units with opposite hinges. Refer
to the illustrations.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the find
a showroom section of our website, subzero.com. For
questions regarding the installation, call Sub-Zero Cus-
tomer Care at 800-222-7820.
DUAL OPENING WIDTH W
Two 15" Models 30" (762)
15" and 24" Models 39" (991)
Two 24" Models 48" (1219)
Dual installation kit required.
WITHOUT FILLER STRIP
FILLER STRIP
Opposite hinges Same side hinges
Site Preparation

Sub-Zero Designer Series Specifications

General

Brand	Sub-Zero
Model	Designer Series
Category	Wine Cooler
Language	English