FORESTER (NA) A8050BE–A (ENG.)
7
Starting and operating
7-29
– CONTINUED –
B To set cruise control
HG0312HB3002BB
Cruise control lever
1. Push the “CRUISE” main switch.
2. Depress the accelerator pedal until the vehicle reaches to the de-
sired speed.
3. Push the control lever downward in the “SET, COAST” direction
and release it. Then release the accelerator pedal.
The vehicle will maintain the desired speed.
Vehicle speed can be temporarily increased while driving with the
cruise control activated. Simply depress the accelerator pedal to ac-
celerate the vehicle. When the accelerator pedal is released, the ve-
hicle will return to and maintain the previous cruising speed.
B To temporarily cancel the cruise control
There are four ways to cancel the cruise control temporarily:
D Depress the brake pedal.
D Pull the control lever in the “CANCEL” direction.
D Depress the clutch pedal (manual transmission vehicles only).
D Shift the selector lever into the “N” position (automatic transmis-
sion vehicles only).
If the vehicle speed drops 9 mph (15 km/h) below the preset speed,
the preset speed will automatically cancelled.
To resume the cruise control after it has been temporarily canceled
and with vehicle speed of 25 mph (40 km/h) or more, push the control
lever upward in the “ACCEL, RESUME” direction to return to the origi-
To Next Page
Loading...
