FORESTER (NA) A8050BE–A (ENG.)
7-30
nal cruising speed automatically.
B To turn off the cruise control
There are two ways to turn off the cruise control:
D Push the main switch again.
D Turn the ignition switch to the “ACC” position (but only when the
vehicle is completely stopped).
B To change the cruising speed
n To increase the speed
1. Push the control lever upward in the “ACCEL, RESUME” direction
and hold it until the vehicle reaches the desired speed.
The control lever can be used for increasing the cruising speed slight-
ly. Pressing the control lever upward in the “ACCEL, RESUME” direc-
tion increases the vehicle speed about 2 mph (3.2 km/h). Press the
control lever repeatedly until the desired speed is reached.
OR
1. Depress the accelerator pedal to accelerate the vehicle to the de-
sired speed.
2. Push the control lever downward in the “SET, COAST” direction
once. Now the desired speed is set and the vehicle will keep running
at that speed without depressing the accelerator pedal.
n To decrease the speed
1. Push the control lever downward in the “SET, COAST” direction
and hold it until the vehicle reaches the desired speed.
The control lever can be used for decreasing the cruising speed
slightly. Pressing the control lever downward in the “SET, COAST”
direction decreases the vehicle speed about 2 mph (3.2 km/h). Press
the control lever repeatedly until the desired speed is reached.
OR
1. Depress the brake pedal to release cruise control temporarily.
2. When the speed decreases to the desired speed, press the control
lever downward in the “SET, COAST” direction once. Now the desired
speed is set and the vehicle will keep running at that speed without
depressing the accelerator pedal.
To Next Page
Loading...
