Black plate (139,1)
北米Model "A2440BE-B" EDITED: 2007/ 5/ 7
tial illumination when regular illumina-
tion (for driving) has begun.
! Date/Time settings
The following items can be set or regis-
tered in the “Date/Time” setting menu.
. Present date & time
. Birthday
. Anniversary
NOTE
To enter “Birthday” and “Anniversary”,
“Present date & time” must be set.
To enter the “Date/Time” setting menu,
take the following steps.
1. Within 12 seconds after turning on the
ignition switch, press the “
/SET” switch
for at least 2 seconds.
2. The display shows “ METER
SETTING”, and then changes to the
setting screen.
3. When the setting screen is displayed,
select “Date/Time” by pressing the “
” or
“
” switch. And press the “ /SET” switch
to enter the “Date/Time” settings.
After the Date/Time setting screen has
been d isplayed, the di splay can be
switched as shown below by pressing
the “
” or “ ” switch.
Refer to the following procedure for further
steps.
! Present date & time
1. Press “
” or “ ” until “Present date &
time” is displayed, and press “
/SET”.
Instruments and controls 3-17
– CONTINUED –
3
To Next Page
Loading...
