Subaru 2008 OUTBACK - Cargo Area Light (Station Wagon); Trunk Light (Sedan); High Mount Stop Light (Sedan)

Black plate (414,1)
北米Model "A2440BE-B" EDITED: 2007/ 5/ 7
11-60 Maintenance and service
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Reinstall the lens.
& Cargo area light (Station wa-
gon)
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Reinstall the lens.
& Trunk light (Sedan)
1. Push both sides of the light cover, and
then remove the cover by pulling it out.
2. Pull the bulb out of the socket. Install a
new bulb.
3. Reinstall the cover.
& High mount stop light (Se-
dan)
It may be difficult to replace the bulbs.
Have the bulbs replaced by your SUBARU
dealer if necessary.