Black plate (143,1)
北米Model "A2440BE-B" EDITED: 2007/ 5/ 7
Canada-spec. models
The display shows the interruptive mes-
sage for 3 seconds and then returns to its
original display. At this time, the specified
warning message leaves the “
” mark on
the lower left side of the display. When the
“
” mark is indicated, it is possible to
display the warning message again by
pressing the “
/SET” switch.
If the interruptive message overlaps with
another indication, the interruptive mes-
sage is shortened.
Instruments and controls 3-21
– CONTINUED –
3
To Next Page
Loading...
