EasyManua.ls Logo

Subaru 2008 OUTBACK - Meters and Gauges (Vehicle Without SI-DRIVE); Combination Meter Illumination; Canceling the Function for Meter;Gauge Needle Movement Upon Turning on the Ignition Switch; Speedometer

Subaru 2008 OUTBACK
444 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (146,1)
Model "A2440BE-B" EDITED: 2007/ 5/ 7
3-24 Instruments and controls
Meters and gauges (Vehicle
without SI-DRIVE)
NOTE
Liquid-crystal displays are u sed in
some of the meters and gauges in the
combination meter. You will find their
indications hard to see if you wear
polarized glasses.
& Combination meter illumina-
tion
When the ignition switch is turned to the
ON position, the various parts of the
combination meter are illuminated in the
following sequence:
1. Combination meter dials light up.
2. Meter needles and gauge needles
each show MAX position.
3. Meter needles and gauge needles
each show MIN position.
4. Regular illumination (for driving) be-
gins.
NOTE
The above sequence of operations may
not take place if you quickly turn the
ignition switch to start the engine. This
is not an abnormality.
& Canceling the function for
meter/gauge needle move-
ment upon turning on the
ignition switch
It is possible to activate or deactivate the
movement of th e meter needles and
gauge needles that takes place when the
ignition switch is turned to the ON
position.
Turn the ignition switch to the Acc
position. With the A trip meter indication
selected, briefly press the trip knob twice.
You can now establi sh the activa ted/
deactivated setting for movement of the
meter needles and gauge needles. To
change the current setting, press the trip
knob for at least 2 seconds.
: Activated
: Deactivated
Briefly press the knob to return to the A trip
meter indication.
If you turn the ignition switch to the
LOCK position, turn the ignition switch
to the ON position, or open and close the
drivers door during the setting procedure,
the new setting will be canceled. Also, if
you do not press the trip knob for a period
of 10 seconds, the new setting will be
canceled.
NOTE
It is not possible to cancel sequential
illumination of the combination meter
while sequential illumination is actually
taking place. Cancel sequential illumi-
nation when regular illumination (for
driving) has begun.
& Speedometer
The speedo meter shows the veh icle
speed.

Table of Contents

Other manuals for Subaru 2008 OUTBACK

Related product manuals