Subaru Forester 2003 - Checks after Dynamic Test; Checks with the Engine Running; Dynamic Test with the Vehicle Running

PI-4
PRE-DELIVERY INSPECTION
PRE-DELIVERY INSPECTION
Checks with the Engine Running
Dynamic Test with the Vehicle Running
Checks after Dynamic Test
Step Check point
26. Test mode connectors (1) Test mode connectors
27. Starting condition (2) Start the engine and check that the engine starts smoothly.
28. Exhaust system (3) Check that the exhaust noise is normal and no leaks are found.
29. Indicator light (4) Check that all the indicator lights operate normally.
30. Clock (5) Check that the clock operates normally.
31. Radio (6) Check that the radio system operates normally.
32. Cigarette lighter (7) Check that the cigarette lighter operates normally.
33. Lighting system (8) Check that the lighting systems operate normally.
34. Window washer (9) Check that the window washer system operates normally.
35. Wiper (10) Check that the wiper system operates normally.
36. Power window operation check (11) Check the power window for correct operations.
Step Check point
37. Brake test (1) Check that the foot brake operates normally.
38. Parking brake (2) Check that the parking brake operates normally.
39. AT shift control (3) Check the AT shift patterns are correct.
40. Heater & ventilation (4) Check that the heater & ventilation system operates normally.
41. Air conditioner (5) Check that the air conditioner operates normally.
42. Speed control (6) Check that the speed control operates normally.
Step Check point
43. ATF level (1) Check that the ATF level is normal.
44. Power steering fluid level (2) Check that the power steering fluid level is normal.
45. Fluid leak check (3) Check for fluid/oil leaks.
46. Water leak check (4) Spray the vehicle with water and check for water leaks.
47. Appearance check 2 (5) Remove the protective coating (wrap guard).(if any)
(6) Check the body paints for damage and smears.
(7) Check the plated parts for damage and rust.