4. Select a number by operating the “ ”
or “
” switch. Then push the button.
If you also want to change the setting for
another location, repeat steps 3 and 4.
5. Select “Set” by operating the “ ” or
“
” switch and confirm the setting by
pushing the
button.
6. The system will notify you that the
setting is complete.
NOTE
. The notification will be displayed
with information of both date and
distance or either date or distance in
accordance with the setting
. When “__” is selected for either the
“Month”, “Day”, “Year” or “Distance”
item instead of numbers, the set noti-
fication will be deactivated.
. If the notification continues for 15
days or more, the system will display
“__” on the screen.
. When the distance announcement
reaches 0 km, the display will show
“0000” for the next 311 miles (500 km).
After exceeding 311 miles (500 km), “_
___” will be displayed.
! Oil filter setting
The setting procedure is the same as
“Engine oil setting” F3-76, but select the
“Oil Filter” item in step 2.
! Tires setting
The setting procedure is the same as
“Engine oil setting” F3-76, but select the
“Tires” item in step 2.
! Maintenance schedule setting
The setting procedure is the same as
“Engine oil setting” F3-76, but select the
“Maintenance Schedule” item in step 2.
! On/Off setting
1. Perform the preparation steps accord-
ing to “Preparation for maintenance set-
tings” F3-76.
Instruments and controls/Multi function display
– CONTINUED –
3-77
To Next Page
