Instruments and controls/Multi function display
4. Push the button once more to
enter the setting mode.
5. The system will notify you of the place
to be selected for approximately 2 sec-
onds.
6. Select one of the registration lines by
operating the “
” or “ ” switch. Then
push the
button.
7. To overwrite the previous registration,
push the
button. When registration is
performed the first time, it is registered
directly without a notification.
8. The system will notify you that the
registration is complete.
NOTE
The driving history can be registered
for the trip meter A or B.
& Car settings
The items in the car settings can be set.
To change the items, operate the “
” or
“
” switch, and then push the button.
NOTE
When the ve hicle is in motion, the
selectable items will be limited.
3-80
To Next Page
Loading...
