Instruments and controls/Multi function display
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pushing
the
button.
6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
! Keyless access setting (models
with “keyless access with push-
button start system”)
! Preparation for keyless access
settings
1. Perform the preparation steps accord-
ing to “Preparation for car settings” F3-81.
2. Operate the “ ” or “ ” switch to
select the “Keyless Access Setting” item.
Then push the
button.
! Driver’s door unlock setting
1. Perform the preparation steps accord-
ing to “Preparation for keyless access
settings” F3-86.
3-86
To Next Page
