Seat, seatbelt and SRS airbags/Front seats
The following seat positions can be
registered.
. Forward/backward position of the seat
. Angle of seatback
. Angle of seat cushion
. Height of seat
! Registration of seat position with
button “1” or “2”
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The select lever is in the “P” posi-
tion.
2. While pressing the “SET” button, press
and hold the desired button “1” or “2”.
A chirp sounds once, and the seat position
is registered.
! Registration of seat position with
each access key
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the “LOCK”/
“OFF” position.
. The select lever is in the “P” posi-
tion.
2. While holding the access key an d
pressing the “SET” button, press the “
”
button of the access key.
A chirp sounds once, and the seat position
is registered.
! Retrieval of seat position regis-
tered with button “1” or “2”
WARNING
Be sure to press the correct button
to retrieve your registe red seat
position. If the seat position is not
optimum for you, it may adversely
affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
involving serious injury or death.
1. Turn the ignition switch to the “ON”
position.
2. While the select lever is in the “ P”
position and the parking brake is applied,
press button “1” or “2”.
1-6
To Next Page
Loading...
