Subaru LEGACY 2004 - Manifold Absolute Pressure Sensor

FU(H4SO 2.0)-26
FUEL INJECTION (FUEL SYSTEMS)
Manifold Absolute Pressure Sensor
9. Manifold Absolute Pressure
Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the connector from manifold abso-
lute pressure sensor.
3) Remove the manifold absolute pressure sensor
from throttle body.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use new O-rings.
Tightening torque:
2.0 N
⋅ m (0.20 kgf-m, 1.5 ft-lb)
IN-00203
FU-02079