Subaru LEGACY 2004 - Fuel Tank

FU(H4SO 2.0)-39
FUEL INJECTION (FUEL SYSTEMS)
Fuel Tank
20.Fuel Tank
A: REMOVAL
WARNING:
• Place “NO FIRE” signs near the working area.
• Be careful not to spill fuel on the floor.
1) Set the vehicle on a lift.
2) Release the fuel pressure.
<Ref. to FU(H4SO 2.0)-38, RELEASING OF FUEL
PRESSURE, PROCEDURE, Fuel.>
3) Drain fuel from the fuel tank.
<Ref. to FU(H4SO 2.0)-38, DRAINING FUEL,
PROCEDURE, Fuel.>
4) Remove the rear seat.
5) Remove the service hole cover from fuel pump.
(1) Remove the bolts (A).
(2) Push the grommet (B) down under the body
and remove the service hole cover.
6) Disconnect the connector from fuel pump.
7) Remove the service hole cover from fuel sub lev-
el sensor.
(1) Remove the bolts (A).
(2) Push the grommet (B) down under the body
and remove the service hole cover.
8) Disconnect the connector (A) from fuel sub level
sensor.
9) Disconnect the quick connector from the fuel de-
livery (B) and return hose (C). <Ref. to FU(H4SO
2.0)-53, REMOVAL, Fuel Delivery, Return and
Evaporation Lines.>
10) Remove the rear wheels.
11) Remove the bolts which secure rear brake
hose installation bracket.
FU-01124
(A)
(B)
(A)
FU-01125
FU-01126
(B)
(A)
(A)
FU-01127
(A)
(B)
(C)
FU-01128