99
Stored Locations
■ Reviewing and modifying avoid areas
Using this function, you can review the stored avoid areas in the form of a list and modify them if necessary.
1
Select (list).
2
Select the avoid area to be modified.
3
Select the key corresponding to the item to be modified.
For details regarding the function of each key, refer to “Reviewing and modifying
memory points” on Page 91.
NOTE
The methods for deleting individual and all avoid areas are the same as those described on Page 94 and 95 for memory points.
Press the button or select , then select (stored locations), and then select (avoid area).
To Next Page
Loading...
