34
Setting Route
■ “Previous Destination” method
This method allows you to choose one of the most recently used 100 destinations or waypoints as your new
destination or waypoint.
1
Select a desired location from the Previous Destination list.
: Use this key to display up to five previous suggestions.
: Use this key to display the previous suggestion.
: Use this key to display the next suggestion.
: Use this key to display up to five of the next suggestions.
2
Select (destination) or (waypoint).
NOTE
You can select (name) or (date) to change the sequence in which previous destinations are displayed.
First, choose either of the two procedures below to follow the “previous destination” method.
• Press the button or select , select (destination entry), and then select (previous
destination).
• Press the button and select (previous destination).
To Next Page
Loading...
