82
Navigation Setup
Set clock
Since the adjustments for minutes and seconds are made automatically using the time data provided by GPS
satellites, you can set your clock by simply performing a time-zone and daylight saving time adjustment using
this function.
1
Select if you prefer 24-hour display; select for 12-hour
display.
2
Select the time-zone by pressing the , , or .
NOTE
Initial time-zone setting of this navigation unit is Pacific (west disc) /Eastern (east disc).
3
Select the daylight saving time mode by pressing or .
NOTE
Select to advance the time by one hour.
Press the button or select , then select (navigation setup), and then select (set clock).
To Next Page
Loading...
