67
Route Options
■ Setting conditions for simulation drive
You can change the simulation drive conditions using this procedure.
1
Select (edit).
The EDIT ROUTE PREVIEW screen will appear.
(to destination or next waypoint):
The simulation drive will stop at the destination or the next waypoint.
(to next POI):
The simulation drive will stop at a point of interest that has been set up on the route.
(delete):
A selected POI will be deleted.
POI keys:
When you select one of the six POI category keys, the system will retrieve the
selected POI from the Quick POI storage and display it on the map. When you select
the key, you can find POIs of other categories. For more details, see
Page 74.
Press the button or select , then select (route options), and then select (route preview).
To Next Page
Loading...
