93
Stored Locations
(category): Use this key to change the storage category. After selecting
this key, select the key of the new category.
(name): Select this key to change the name of a memory point. When
the change has been completed, select (OK). Then select
(on) if the name is to be displayed on the map, or
(off) if it is not to be displayed.
(position): Select this key to review the memory points and modify a
memory point on the map screen. After checking or modifying
it, select (OK).
(telephone): Select this key to modify a telephone number. When the
modification has been completed, select (OK).
To Next Page
Loading...
