Sullair LS-10 series - Page 22

Section 3
SPECIFICATIONS
17
3.4 LUBRICATION CHANGE RECOMMENDATIONS AND MAINTENANCE
LUBRICANT
FLUID CHANGE
SEPARATOR CHANGE
B--
4,000 Hours or more frequently if conditions so require.
FLUID FILTER CHANGE
C--
When measured pressure loss exceeds 20 psig (1.3 bar).
D--
When measured pressure loss exceeds 10 psig (0.7 bar).
E--
When required by fluid analysis or known contamination.
F--
Does not require replacement during normal service conditions.
A--
8,000 Hours or once a year.
G--
Every 1000 hours.
Sullube
A,E G,C A,D
Sullair LLL--4--F
A,E G,C A,D
SRF 1/4000
B,E G,C B,D
24KT
F,E G,C A,D
Sullair CP--4600--32--F
B,E G,C B,D