Section 3
SPECIFICATIONS
17
A-8,000 Hours or once a year.
B - 4,000 Hours or more frequently if conditions so require.
C - When measured pressure loss exceeds 20 psig (1.3 bar).
D - When measured pressure loss exceeds 10 psig (0.7 bar).
E - When required by fluid analysis or known contamination.
F - Does not require replacement during normal service conditions.
G - Every 1000 hours.
3.4 LUBRICATION CHANGE RECOMMENDATIONS AND MAINTENANCE
LUBRICANT FLUID CHANGE FLUID FILTER CHANGE SEPARATOR CHANGE
Sullube A , E G , C A , D
SRF 1/4000 B , E G , C B , D
24KT F , E G , C A , D
CP-4600-32-F B , E G , C B , D
tional problems such as foaming, filter plugging, ori-
fice or line plugging.
Flush system when switching lubricant brands.
When ambient conditions exceed those noted or if
conditions warrant use of “extended” life lubricants
contact Sullair for recommendation.
3.3 APPLICATION GUIDE
Sullair encourages the user to participate in a fluid
analysis program with the fluid suppliers. This could
result in a fluid change interval differing from that
stated in the manual. Contact your Sullair dealer for
details.
To Next Page
Loading...
Need help?
General
