Sullair LS-120 series - Page 53

Section 9
ILLUSTRATIONS AND PARTS LIST
47
9.3 MOTOR, FRAME, COMPRESSOR AND PARTS LS-120 (40-60HP/ 37-45KW)
key part
number description number quantity
1 washer, reg pltd 5/8" 838210-112 4
•washer, reg pltd 1/2" (I) 838208-112 4
2 washer, springlock 5/8" 837810-156 4
•washer, springlock 1/2" (I) 837808-125 4
3 capscrew, hex GR5 5/8-11x 1 1/4" 829110-125 4
•capscrew, hex GR5 1/2"-13 x 1 1/4" (I) 829108-125 4
4 capscrew, hex GR5 5/8-11x 1 1/4" 829110-125 2
5 support, motor (40, 50HP/ 37KW) 250017-490 1
support, motor (60HP/ 45KW) 250018-536 1
•support, motor (40, 50HP/ 37KW) (I) 02250051-099 1
•support, motor (60HP/ 45KW) (I) 02250073-416 1
6 washer, springlock 5/8" 837810-156 6
7 nut, hex 5/8"-11 866510-559 2
8 motor (40, 50HP/ 37KW) consult factory 1
•motor (60HP/ 45KW) consult factory 1
9 adapter, compressor/motor 250014-882 1
10 capscrew, hex GR5 3/8"-16 x 2 1/4" 829106-225 10
11 capscrew, hex GR5 5/8"-11 x 1 1/2" 829110-150 4
12 guard, coupling 250018-412 1
13 screw, hex ser washer 5/16" x 3/4" 829705-075 3
14 hub, coupling 1 7/8" x 1/2" (40, 50HP/ 37KW) 250018-005 1
•hub, coupling (60HP/ 45KW) 250018-008 1
15 element, coupling (40, 50HP/ 37KW) 250004-641 1
•element, coupling (60HP/ 45KW) 250018-551 1
16 hub, coupling 1 3/4" x 3/8" 250004-642 1
•hub, coupling (60HP) 250018-006 1
17 capscrew, ferry hd 1/2"-13 x 2 1/2" (40, 50HP/ 37KW) 867308-250 6
•capscrew, ferry hd 5/8"-11 x 2 3/4" (60HP/ 45KW) 867310-275 6
18 washer, springlock 1/2" (40, 50HP/ 37KW) 837808-125 6
•washer, springlock 5/8" (60HP/ 45KW) 837810-156 6
19 washer, springlock 3/8" 837806-094 10
20 nut, hex 3/8"-16 866506-337 10
(Continued on page 49)
(I) Used on compressors with vibration mounts.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR