Section 9
ILLUSTRATIONS AND PARTS LIST
81
9.12 COMPRESSOR DISCHARGE SYSTEM (AIR-COOLED) (CONTINUED)
key part
number description number quantity
23 filter, assy genesis (III) 02250117-782 2
24 separator, air/fluid secondary (IV) 02250100-754 1
25 separator, air/fluid primary (I) 02250100-753 1
26 tank, separator 14" (40, 50HP/ 37KW) 02250109-524 1
•tank, separator 14" (60-100HP/75KW) 02250110-502 1
27 decal, maintenance kit LS120/160 02250144-505 1
28 plug, o-ring 1 1/4" 040029 1
29 plug, sight glass 1 7/8" 02250097-611 1
30 decal, warning mixing fluids 02250110-891 1
31 decal, compressor fluid Sullube (VI) 02250069-389 1
32 decal, warning compressor fluid fill cap 049685 1
33 switch, temp 240° 3/4" SAE 02250100-095 1
34 locknut, conduit 1/2" 847200-050 2
35 coupling, conduit 1/2" 250007-179 1
36 elbow, conduit 1/2" 846600-050 1
37 adapter, SAE x NPT 1/2" x 1/4" 811504-025 1
38 bushing, reducing 1/4" x 1/8" stl plated 867100-005 1
39 fitting, compression adjustable 250028-635 1
40 probe, RTD discharge temp 250039-909 1
41 plug, straight thrd 3/4"-16 SAE viton 250042-623 1
42 washer, reg 1/2" 838208-112 4
43 washer, springlock 1/2" 837808-125 4
44 capscrew, hex GR5 1/2"-13 x 1 1/2" 829108-150 4
45 o-ring, viton 2 1/2" x 1/8" 826502-230 1
(Continued on page 83)
(III) For maintenance on genesis filter assembly no. 02250117-782, order replacemenet filter no. 02250117-
782.
(IV) For maintenance on air/fluid separator no. 02250100-754, order secondary replacement element no.
02250100-756.
(V) For maintenance on air/fluid separator no. 02250100-753, order primary replacement element no.
02250100-755.
(VI) Sullube is the standard fill for LS-120 and LS-160 air compressors. If your compressor has an optional
fill, consult Section 9.26, Decal Group (key numbers 20A-20D) for matching fluid decal part number.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
Need help?
General
