Section 9
ILLUSTRATIONS AND PARTS LIST
85
9.13 COMPRESSOR DISCHARGE SYSTEM (WATER-COOLED)
key part
number description number quantity
1 elbow, tube-M 1 1/2" x 1 1/2" (LS-120) 810524-150 1
•elbow, tube-M 2” x 2” (LS-160) 810532-200 1
2 heat exchange (40, 50HP/ 37KW) 250017-527 1
•heat exchange (60-75HP/ 45-56KW) 040680 1
•heat exchange (100HP/ 75KW) 043008 1
3 elbow, tube-M 1 1/2" x 1 1/2" w/ 1/4" tap
(50-75HP/37-56KW) 02250099-810 1
•elbow, tube-M (100HP/ 75KW) 022500110-165 1
4 tube, MPV to cooler (40, 50HP/ 37KW) 02250105-698 1
•tube, MPV to cooler (60-75HP/ 45-56KW) 02250143-514 1
•tube, MPV to cooler (100HP/ 75KW) 02250046-584 1
5 elbow, tube SAE1 1/2" x 1 7/8" (LS-120) 811615-150 1
•elbow, tube SAE 2” x 2” (LS-160) 811632-250 1
6 valve, minimum pressure (LS-120) (I) 02250097-598 1
•valve, minimum pressure (LS-160) (II) 02250109-817 1
7 adapter, SAE 1 7/8" x 1 7/8" (LS-120) 02250055-014 1
•adapter, SAE 2 1/2" x 2" (LS-160) 02250110-661 1
8 elbow, tube-M 1/4" x 1/4" 250018-430 3
9 elbow, tube-M 1/4" x 1/8" 250018-429 1
10 tube, cooler to moisture separator (50-75HP/ 37-56KW) 02250105-700 1
•tube, clr to moisture sep (100HP/ 75KW) 02250046-585 1
11 decal, maintenance kit LS120/160 02250144-505 1
12 connector, flex 1/4" x 1/4" 020169 2
13 tubing, 1/4" stainless steel 841215-004 14.5 ft
14 connector, tube male bulkhead, 1/4" 02250101-490 1
15 bracket, mounting support 02250101-192 1
(Continued on page 87)
(I) For maintenance on minimum pressure valve no. 02250097-598, order repair kit no. 02250110-727, cap
kit no. 02250046-396, o-ring kit no. 02250048-363, and piston kit no. 02250051-337.
(II) For maintenance on minimum pressure valve no. 02250109-817, order repair kit no. 250018-456, cap kit
no. 02250044-355, o-ring kit no. 02250048-365, and piston kit no. 02250051-336.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
Need help?
General
