Sullair SD-220 - 1.4.4 Technical data sheet

INSTALLATION, START-UP & MAINTENANCE MANUAL
MODEL NO.: SD-220 TO SD-600- DDS OPTION
REV 0 – May 24,,.2001
9
SECTION 1
1.4.4 Technical data sheet
TYPE SD-220 SD-300 SD-400 SD-500 SD-600
Medium
Air, free of aggressive elements
Connection NPT 1-1/2" NPT 1-1/2" NPT 1-1/2" NPT 2” 2”
Flow capacity
(1)
(STD) SCFM 220 300 400 500 600
Desiccant
Standard
Input temp.: from 100°F and dew point
(2)
-40°C (-40°F)
Filled with: activated alumina
Quantity of desiccant / Vessel
[Lbs.]
126 167 220 272 350
Filter size (mph/mpr) 300 300 420 470 700
Control Electronic board or PLC Controller
Operating Voltage
Standard 120 V / 60 Hz (AC)
Special voltage
Consult factory
Drying time
Standard 5 min
(1)
Flow capacity in SCFM at 100 PSIG according to DIN ISO 7183
(2)
Pressure dew point
NOTE: Settings for DDS:
Standard dryers DDS Control (-41°C) High humidity (-36°C)